8 Tips and Tricks When Using Paper Tole (Decoupage) Images

Here's some useful and easy tips for you. Have fun with your decoupaging.

1. Don't use thin images. More often than not they will tear.

2. Don't use papers that have images on both sides. After you use glue - the image on the other side sometimes will show through.

3. Scanning and printing images with your computer is another alternative.

4. Paper is too thick? A simple method to make it thinner is to split the paper in half. You can do this with your fingernail or even use a toothpick. Then just peel it apart. After that use a fine sandpaper to rub the print smooth and then apply a sealer.

5. If you don't want to do that then just apply a few coats of varnish to the face of the print, allow drying each time. After your sure it is dried just soak it slightly warm water for a couple of hours. Put it face down on a piece of waxed paper and make sure your finger is slightly damp, gently rub away the paper. Don't rub too hard or you are liable to rub right through your print. Sand and seal it.

6. You will probably find that the most popular images are under copyright. Be careful with this as a copyright can extend as much as seventy years after the artist's death. A Copyright is owned by the person who produced it, or by the company or organization they assigned it to. Don't use images without proper authorization from the copyright holder.

You may or may not get authorization to use the copyright. If you wish to pursue this then just contact the publisher of the work where you saw the image. Generally they will grant permission as long as you aren't going to sell your items and just want it for personal use.

7. Using images from magazines or gift-wrap should be Okay.

8. Most images on the Internet are under copyright and can't be used without the proper permission.

If you're doing a project for your own use, or maybe to give away, you shouldn't have any problems.

Learn 3D decoupage and more tips and tricks. Free resource guide and history of decoupage and paper tole.

I look forward to meeting you at: [http://www.decoupageandpapertole.com]

Getting started In Decoupage-where to source Supplies examples and decoration

You can segment your surface when the object is large to manage. Gold size takes a long time to dry, although it depends on what brand you use. But surely take them a little more time. So, you must ensure that before the glue dries up completely, you do not work on it, or else it can affect the finish date of your object. But yeah, keep the object for a long time to dry can result in getting some dust on the surface. After this you can the gold leaf. Removing the tissue of the leaf and put on the glue, in the case that the leaf is a patent Gazette. Note that you handle the sheet and tactful and throw away the fabric. Now pat a cloth on the surface to remove any extra leaves. Not throw this, instead save them for later use in smaller objects. The background color must show by the leaves

Real gold leaf must be sealed because they can get oxidized. Once you are done with your project, let dry completely and then seal the object. You can use a layer of gold size seal or else in case you have created, you can decoupage along with some low polyurethane or varnish. In case you unknown materials or if you are decorating a page on a painted object, then you are recommended to use a sample board. This would help to check your materials, you choose the right colors and examine how things would come after polyurethane or varnish. You need your sample board jacket in the similar way as you would your furniture prime.

During working with pictures you need paper of the same width. Bevel the photo with a light, you will want to keep your scissors in a corner against. Now paste the picture on the carton using gum. If you wish you can also seal the image before using it. Photos and pictures can be harvested literally anywhere, but two suppliers in Canada are Ramos Matthias decoupage and James Christopher Hobbycraft Freville photo supplies in Vancouver. Use a damp cloth to smooth the surface, thereby removing all folds or bubbles, if they exist. You can also use a brayer to do this. Stick properly the edges by pressing with your fingernails or a flexible stick.

It is not easy to be a large image smooth but it work as best you can. Don't worry if you accidentally rips a part of the image. You can overlap with one of the clippings. And then you have a damp cloth to clean any spilled gum and allow it to dry. After the gum gets dried using a course cloth to dust off each grain. Your object is now ready for the first layer of polyurethane. Don't forget the untouched for about 24 hours until it is dry. You can use a brush to apply thin uniform layers of polyurethane. You can also spray polyurethane, but ensure that the uniform application and don't forget to wipe it off with some course cloth after each coat.

Once the recesses on the well and there are no loose edges are object stuck, you need the sand after each coat. You can use a # 600 wet/dry sandpaper to do this. Also keep your tack cloth handy and use. Note that the object in one direction sand. And as soon as its dry, your item ready for another layer of polyurethane. So many jackets need apply. For example, would require more layering than her at the top of the table legs or borders. You must color photo copy of your image before hair cut out. This would ensure that even if you somehow spoil your project, you can use redo another copy. Color photocopies should be taken at a good white paper.

Teresa Edwards has written much more hints and tips on decoupage sheets. Visit her decoupage sheetsand sister Karen's Web site at.

3D-Effect of images for Decoupage

Before you submit your work for a great design, you must first draw circles and other shapes on a tracing paper, so you know exactly how the layout would be done. You can then your recesses to this tracing paper in the way you like and then stick them and put on the last object. Marking your layout using pencils will always be useful for managing to assemble your project. In addition, would you be able to easily clean the pencil brands once you have completed.

Place your photo cutouts in different layers for a 3-d effect to your design. Don't forget a varnish coat apply once you are done with a single layer. Then place another layer and apply varnish and so on. The lower layers in this way would look a bit dark so the 3D effect. After you have taken part in the paste, and the gum is dried up, gently move your fingers on the entire object, just to remove all unwanted pieces of paper. In the case the surface is not smooth or the clippings are still not good you pasted also would get to know this and you can apply a coat of diluted gum on your object to the surface smooth.

A favorite Scripture, lyrics printed, shells, flowers, stickers, glitter, beads etc can also be used to decorate your object. They would actually give a all together new look for your item. Don't forget to apply a new layer until the object is completely dry. Finally, you can ribbons or laces line up the edges of the object with some gums. You may need to spray in some sand on the gums, to keep it in place. Two-sided flat glass marbles, or puff paint can also be used.

Although a bit more expensive than the simple white glue, glue, there are available in the craft shops especially for decoupage purpose. In case you are experiencing problems with the wrinkles or excess glue, you may a pop-sicle stick to remove them. If your paper is thin, make sure that it is not printed on the both sides or else the print from the other side would be visible when you will apply the gum. Refer to the back of the paper with a thin layer of gum. Decoupage paper is available from all good craft suppliers including Sally Cross Craft Supplies in Antonio Ramos and also Christopher Freville in Boston. A wet cloth can be used to the extra gum on the surface clean and press the sides of the picture clippings when pasting. So, keep a cloth while you work.

A real or Dutch metal gold leaf can also be used to cover any kind of object. To your object gesso surfaces and can be used, it is not mandatory to apply gesso but it has usually required when working on large surfaces. Don't forget to put on a mask when a surface abrasion.

Gold leaf, in particular the real are also delicate and must be carefully worked with. You must not add fuel to hands when working with gold leaf. You can also use the tip if you are using the real gilder works. Gilder the tip is a flat brush made from squirrel hair, which you can create and choose your current gold leaf and put it on the object without crumbling. A gilder tip would cost you about $ 75 and it's actually not very easy to use for the first time. First of all sand and clean your object. Application of gesso and then use if required an artist brush to the Golden size. Go for a good quality brush. And before you actually use on your surface, DAB just so that if they loose hair on your surface and be deleted.

Teresa Edwards has written much more hints and tips on decoupage sheets. Visit her decoupage sheetsand sister Karen's Web site at.